FKM Paddle Mixer

Horizontal single shaft mixer is equipped with special designed paddles, which is widely use to mix granules and granules contained material, such as plastic granules, seasoning material, dissolved medicines, and food particles.

Paddle does not only have less damage to the granules, but also less resistance in mixing process, which enable the mixer to run steadily.

Technical parameter:
Batch working volume: 0.1-15cbm
Mixing time: 15-60mins

power: 3kw-160kw

Material: 316L, 304, mild steel

1.Flexible material selection
Material can be carbon steel, manganese steel, ss304, 316L and 321; besides, different material can also be used in combination.
Material is different between the part contact with the raw material and the parts don’t contact with the raw material.
Surface treatment for stainless steel include sandblasting, wiredrawing, polishing, mirror polishing, all can be used in different parts of a mixer.


2.High efficiency mixing unit
Different main shaft agitators can be equipped according to the properties of raw materials.
Materials commonly mixed are: different kinds of powder to be mixed with each other, batches mixing for the same material, powder with a small quantity of liquid, liquid with some powder, like slurry, thickening or diluting slurry, granule with powder, granule with granule, agglomerated material breaking and mixing, and cooling or heating.
The main shaft agitator could be: inner and outer paddle, paddle and ribbon,  and shaver-shaped agitator.


3、High efficient agitator
The paddle mixer has flat paddle and scraper paddle,and is widely used in granule material especially fluffy or elastic material! the paddle has its own angle, matching the running shaft to mix material! the structure of the paddles is simple, which can add wear proof PTFE at the surface or coat with some coating like  alloy or PTFE .

4.Excellent discharging unit
Standard valve for horizontal mixer is pneumatic planar flap valve. When close the valve, the planar flap match the mixing barrel perfectly, this makes no mixing dead zone and better mixing effect.
The drive types of valve are Manual, pneumatic, and electric.
Valves for consideration: powder spherical valve, cylinder valve, plum-blossom dislocation valve, butterfly valve, rotary valve etc.


5.Various inlets
Various inlets on the top cover of the barrel can be designed according to different situations.
They can be used as man hole, cleaning door, feeding hole, vent, and dust collecting hole. The top cover can be designed as fully-opened lid for easy cleaning.


6.Powerful auxiliary components
Mixer is frequently equipped with many auxiliary components, like steam coil jacket, honeycomb pressure jacket, medium circulation jacket, sampling valve, high speed chopper, temperature sensor, weighing system, dust removal system and so on.
Different heat medium requires different jacket, it can be used for heating and cooling, while, the temperature should be within 250 Celsius degree.
If a small quantity of liquid is required during mixing, spraying or atomizing unit is necessary in order to mix the liquid evenly with the main ingredient. The liquid-adding system is basically composed by the three parts: pressure source, liquid storage pot and spraying nozzles.


Horizontal single-shaft paddle mixer is composed of a power group driven the shaft to rotate, several paddles with certain angles distribute in the shaft continuously, turning over the material in the operation, making the material moving in all direction. and the small resistance the agitator creates won't crash the material so as to operate smoothly.
未命名 -2
Selection way:
1. Choose the batch working capacity from 0.1cbm to 20cbm, select mixer accordingly.
2. Choose raw material for the part contact with raw material, non-contact with raw material, other parts like motor and reducer, bearing material can not be chosen; According to the material to be mixed, processing condition, health level, raw material can be  mild steel, sus304, sus316L, sus321; And choose the surface treatment according to the raw material.
3. Motor power is chosen according to the material gravity, fluidity, and operation.
Operation is divided as: Start mixer when it is empty (normal duty); Start mixer with load (heavy duty)
4. Adding the auxiliary components like spraying, heating and cooling according to processing condition.
5. Mixer inlets: feeding ports, cleaning port, vent.
6. Chose discharging and driven mode: manual, pneumatic and electric.
Note: mixer selection is a very important step, your detailed material information, processing and factory arrangement is very helpful to get professional technical support from us.


Configuration 1: using crane to hang bigbag material and feeding the mixer.
Configuration 2: mufti-level platform, manual undo the bag, mixing and packing with a bulk bag packer.
Configuration 3: simple mixer frame, feed the mixer manually with the help of a folk lift.
Configuration 4: using manual feeding platform, after mixing, screw conveyor send the material to the storage silo, a packer under it.
Configuration 5: load the material manually on the ground, use vacuum feeder to transfer material into the mixer, after mixing, pack with a bulk-bag packer.
Configuration 6: multi-stage vacuum feeder, store it after mixing, then packing.
Configuration 7: multi-level operation platform, elevator sending to material silo, mixing, storage, and then packing. Tower structure.
Configuration 8: bucket elevator feeding, mixing, storage, and packing.
Configuration 9: vacuum feeding, mixing, storage, packing.
Configuration 10: Manual feeding, mixing, storage, packing.
Common supporting equipments. 



Power combination

Equipment material

(Without the optional)
(Without the optional)
(Need to fill)

Main configuration

Function option

Complete sets option


(powder mesh, granule size, bulk density)
(granule's max size, block materials's size)
(The Angle of the accumulation of natural material forming)
(fluidity,viscosity,strong acid, strong alkali, abrasion,easy fragile, moisture absorption,agglomeration,melt,low flash point, pilling, fiber,etc)
(type of materials, minimum additive proportion, heating/cooling, chemical reaction,add liquid, batch mixing, dynamic bin)
(fast mixing. Food grade,resistance acid and alkali and corrosion, heating/cooling, easy clean, wear-resisting,crush,large capacity mixing etc)
(the output per batch calculated by volume)
(304、316L、321, carbon steel etc/ surface treatment requirement)
(3 phase:380V 50HZ)

Basic information

How to find us?